Is your marker leaking down the barrel? Pick up a new complete valve and don't mess around with disassembling your valve (Tippmann does not recommend disassembly of the valve on your own). This valve is complete meaning it contains all the parts necessary to seal the valve. Simply remove your old valve, slide the new one into the power tube, re-attach the gas line, re-assemble your marker, and get back to playing leak free!
Important: Make sure you know which valve you need. This is for older versions of the 98 which connect with an 1/8 inch NPT hose fitting. This WILL NOT WORK with current versions of the 98. Current versions use the TA02022 valve.
If the valve lock screws have stripped out the body of the valve or the threads for the bradied hose or vertical adapter have stripped then you can get by with just getting a valve body. The valve internals should still be okay unless you've gotten metal shavings up in the valve. (Again: Tippmann does not recommend disassembly of the valve on your own)
This valve works only in NON Platinum Series. It has a threaded hose connection and screws hold it in place inside the body. Both of which are tapped directly into the valve's body.
Will also work as a replacement for TA09941 Triumph Complete Valve. Valve lock screws (valve bolts) sold separately.
At this time (July 11, 2005) we don't carry any upgrades for the valve.