|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
No need to turn your gun upside down and shoot it dry! Simply turn off the air supply and pull the brass knob to the rear. Allows you to easily disconnect from your air supply anywhere.
|
This is the replacement hose for the 02-EXP Tippmann A-5 Vertical Expansion Chamber Kit. Standard 1/8 NPT on both ends.
You can not use this hose with the stock flared 90 fitting TA10025.
|
The Pro-Team Products Pro-Flow In-Line Filter System helps to filter the air going into your gun
|
Ninja Paintball 1/8th Inch NPT 45 Degree Gas Line Elbow
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This micro gauge has a 1 inch wide face and can be put anywhere you have an extra 1/8 inch NPT gauge port.
|
This micro gauge has a 1 inch wide face and can be put anywhere you have an extra 1/8 inch NPT gauge port.
|
QD set for those quick tank and gun line changes. Commonly used on remote kits.
|
This micro gauge has a 1" wide face and can be put anywhere you have an extra 1/8" NPT gauge port.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This micro gauge has a 1" wide face and can be put anywhere you have an extra 1/8" NPT gauge port.
|
This 90 degree elbow has your standard 1/8" NPT threads. One side male post and one female port. These are commonly used on bottom lines, regulators, expansion chambers and the such to help get your air from one place to another.
|
Invert Micro Micro Gauge - 1200psi
|
Invert Micro Micro Gauge - 300psi
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Invert Micro Micro Gauge - 6000psi
|
Invert Micro Micro Gauge - 600psi
|
.
|
.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ninja Quick Disconnect - Male - Ninja Black
|
Ninja Macro Line Fitting - Straight - Ninja Black
|
Macro line hose is the easiest hose to work with when running air for you marker. Cut the ends straight with a razor blade (not scissors) and slide it in to a Macro Line Fitting. You're good to go!
|
Ninja Paintball Micro Gauge - 0-6000psi - Black
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ninja Quick Disconnect - Female - Ninja Black
|
This 90 degree fiting has standard 1/8 inch NPT male threads on one end and then accepts a macro line hose at a 90 degree angle. Macro line hose is the easiest hose to work with when running air for you marker.
|
Macro line hose is the easiest hose to work with when running air for you marker. Cut the ends straight with a razor blade (not scissors) and slide it in to a Macro Line Fitting. You're good to go!
|
Ninja Slide Check - Ninja Black
|
|
|
|
|
![Adapter for Paintball Tanks [Soda Stream Machine]](http://paintball.paintball-parts.com/photos/products/4425-1.jpg)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1/8 NPT Female 320 CGA Male Coupler
|
Soda Stream to CO2 Tank Coupler
|
Palmers Pursuit Shop products are designed to fit your custom needs. Where custom still means something.
|
ProCaps Micro Gauge - 1500 psi
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Macro line hose is the easiest hose to work with when running air for you marker. Cut the ends straight with a razor blade (not scissors) and slide it in to a Macro Line Fitting. You're good to go!
|
.
|
.
|
This hose has standard 1/8 inch NPT Male threads on both ends. Length is measured from tip to tip.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This hose has standard 1/8" NPT Male threads on both ends. Length is measured from tip to tip.
|
This hose has standard 1/8" NPT Male threads on both ends. Length is measured from tip to tip.
|
This hose has standard 1/8 inch NPT Male threads on both ends. Length is measured from tip to tip.
|
This hose has standard 1/8 inch NPT Male threads on both ends. Length is measured from tip to tip.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This hose has standard 1/8" NPT Male threads on both ends. Length is measured from tip to tip.
|
This hose has standard 1/8 inch NPT Male threads on both ends. Length is measured from tip to tip.
|
This hose has standard 1/8" NPT Male threads on both ends. Length is measured from tip to tip.
|
This hose has standard 1/8" NPT Male threads on both ends. Length is measured from tip to tip.
|
|
|
