|
|
|
|
This adapter kit is needed if you're wanting to put the Cyclone Feed on your 98 with RT.
This will upgrade all the hoses and fittings on your gun from the smaller 1/16 Inch inner diameter to the larger 1/8 Inch inner diameter. It also includes the "T" fitting needed for guns with one exhaust port.
While Tippmann Sports says this isn't necessary for the RT system, it will give you better air flow through these hoses and fittings and is recommended by many players.
The standard hose length in these kits fits the 98 series. (Including the 98 Custom Platinum Series)
Also works with US Army Project Salvo.
This kit also works with the A-5 for upgrading the fittings. You'll need to buy the longer sections of hose to use with it. Use TA05018 1/8 inch ID Hose, 3-1/4 inch Long to reach the flow control. TA05018 will also work with the 2 exhaust port A-5 receiver.Warranty | Returns: Tippmann Sports
- Warranties for all Tippmann/US Army products are handled through the Tippmann Factory: Toll Free Support: 1-800-533-4831
- Tippmann Gun Warranty Online Registration: http://paintball.tippmann.com/warranty-registration
- Mailing Address: 2955 Adams Center Road, Fort Wayne, IN, 46803, USA
Please see our standard Website Warranty and Returns Information (Link will open in a new window.)
|
|
|
|
|
|
|
|
|
|
|
|
|
Features
- (2) 20-19 1/8 Inch Hoses
- (1) 20-20 1/8 Inch Banjo Fitting
- (1) 02-100 Low Pressure Orifice
- (1) 02-102 1/8 Inch Banjo T Fitting
- (1) 02-103 1/8 Inch Flow Control Valve
|
|
|
|
|
|
|